MecaTP-Forum Index du Forum MecaTP-Forum
Forum d'entre aide sur la mécanique des engins de travaux public
 
 FAQFAQ   RechercherRechercher   MembresMembres   GroupesGroupes   S’enregistrerS’enregistrer 
 ProfilProfil   Se connecter pour vérifier ses messages privésSe connecter pour vérifier ses messages privés   ConnexionConnexion 



 Bienvenue 


MERCI DE CLIQUER SUR LA PUB CI DESSUS
Bonjour a tous, MISE A JOUR du site après une  absence,
The Maintenance of the Excavator in High Temperature

 
Poster un nouveau sujet   Répondre au sujet    MecaTP-Forum Index du Forum -> Espace Technique -> Documentation machine
Sujet précédent :: Sujet suivant  
Auteur Message
champs champs


Hors ligne

Inscrit le: 13 Juil 2016
Messages: 7

MessagePosté le: Mer 27 Juil - 04:01 (2016)    Sujet du message: The Maintenance of the Excavator in High Temperature Répondre en citant

PublicitéSupprimer les publicités ?
In scorching summer, it is a common concern for operators to maintain the excavator. Long time operation in high temperature is a huge challenge for the machines’ cooling and hydraulic system. Due to the high temperature and humidity in summer, the storage battery’s air vent is easy to be blocked. Once blocked, the internal high pressure might trigger the explosion. Besides, the hot temperature also aggravates the abrasion of the tires, which might lead to the explosion of tires. The high temperature damages the quality of the oil. The metamorphic oil will directly influence the oil’s lubricating performance, which causes the aggravation of the excavator’s abrasion.


Besides the regular inspection and maintenance of the excavator, there are also some tips we should follow to avoid the potential dangers. Firstly, change the compact excavator engine’s lubricating oil in time and select the oil that is suitable in summer. When the excavator stops working, put it in the shadow, avoiding direct sunlight. Charge the storage battery timely and make sure the steadiness of the circuit’s joint. Carefully check every component of the excavator to see whether there exist some small cracks. If there are some cracks, repair them in time to prevent the corrosion of the rain.


If the high temperature warning really rings out, calm down and remember the following things.  Lower the load and rotation speed. Place the accelerator to the idle running speed. The heat produced by the friction of every component can be decreased. Add antifreeze can also reduce the temperature of the large excavator. If there is no antifreeze, distilled water and purified water can be replaced.







Revenir en haut
Contenu Sponsorisé






MessagePosté le: Aujourd’hui à 12:49 (2016)    Sujet du message: The Maintenance of the Excavator in High Temperature

Revenir en haut
Montrer les messages depuis:   
Poster un nouveau sujet   Répondre au sujet    MecaTP-Forum Index du Forum -> Espace Technique -> Documentation machine Toutes les heures sont au format GMT + 1 Heure
Page 1 sur 1

 
Sauter vers:  

Index | Panneau d’administration | créer un forum | Forum gratuit d’entraide | Annuaire des forums gratuits | Signaler une violation | Conditions générales d'utilisation
Powered by phpBB © 2001, 2005 phpBB Group
Traduction par : phpBB-fr.com